Hertz MPK165P3 – 6.5″ Component Speakers
$799
Hertz MPK165P3 – 6.5IN 2 WAY SPEAKER SYSTEM
The MPK 165P.3 car audio speakers system energy in the mid-low range ensures a unique listening experience, creating the ideal set up alongside a powerful subwoofer section. The MP 165P.3 woofer electroacoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The MPK 165P.3 timbre balance is entrusted to the MPCX 2P.3 crossover featuring a copper inductor with a 1 mm diameter wire to filter the MP 165P.3, which, with its nominal 3OHM requires high impulse currents. The tweeter MP 25.3 12dB/Octave crossover is built with extremely high quality 160V bi-metallized polyester film capacitor and an air coil inductor. The tweeter (MP 25.3) level control (0/+2.5dB) provides the ability to adapt the system response to the listener preferences and considering the components installation position.
TECHNICAL SPECS
| Component | System |
| Size mm (in.) | 165 (6.5) |
| Power Handling – Continuous W | 115 |
| Power Handling – Peak W | 230 |
| Impedance Ohm | 3 |
| Tweeter diaphragm mm (in.) | 29 (1.14) |
| Woofer Voice Coil Ø mm (in.) | 25 (1) |
| Tweeter Voice Coil Ø mm (in.) | 25 (1) |
| Sensitivity dB SPL | 93 |
| Frequency Response Hz | 45 ÷ 22,5k |
| Crossover Cut off | 4 kHz |
| Crossover Type | 2 Way Passive Crossover |
| Weight of one component – Woofer | 1.20 (2.65) |
| Weight of one component – Tweeter kg (lb) | 0.07 (0.15) |
| Weight of one component – Crossover kg (lb) | 0.17 (0.37) |
ELECTRO ACOUSTIC SPECS
| D mm | 132 |
| Re Ohm | 2,6 |
| Fs Hz | 75 |
| Le mH | 0,28 |
| Vas I | 8 |
| Mms g | 15,1 |
| Cms mm/N | 0,3 |
| BL T*m | 5,45 |
| Qts | 0,56 |
| Qes | 0,63 |
| Qms | 5,2 |
| Spl dB | 94 |
